Upper Balljoint
Outer Tie Rod End
Driver's Front w/ Crossmember removed.
Strut Rod Assembly
Upper Control Arm
Strut Rod Removal
I had already removed the bolts that hold the front of the strut rod to the lower control arm.
Hold bolt heads with a wrench then impact gun/socket wrench the nut to remove. (Arrows show location of bolts in engine compartment)
There is one bolt on a stud at the frame accessible from under the fender. (Red Arrow). Once all the bolts are removed the assembly should fall free.
With the assembly in a vice, I used a 1" wrench with a 1" socket & an impact gun to remove the nuts holding the strut rod bushings together.
The strut rod mount free of it's rod and bushings.
* Pics/Explaination of the rest: balljoint/tie rod removal coming